|
 |
K9 CALLER™
Remote Door Popper
|
 |

IC Cubed continues to produce an ever evolving
door popper with the best possible safety
and reliability features for both the handler
and K9 alike. We believe, that if you try
the K9 CALLER™, you will agree that it is
the best remote door popper available.
The K9 Caller remote door popper provides
the handler with reliable access to their
working canine in every situation. Our system
has innovations that include a multi-frequency
RF transmitter that delivers the door pop
signal in RF environments that would jam
other single frequency door opening systems.
The K9 Caller provides
the handler with a consistent operating distance
of 1000ft. It comes equipped with a transmission
in park sensor that prevents the door from
opening while the vehicle is in motion. The
provided On/Off switch has a built in system
ready LED so you are aware of system status
at a glance. The bi-directional door solenoid
makes installation possible on a wide range
of vehicles including sedans, SUVs, and vans.
Feature Comparison
Our Remote Transmitter:
Transmits Across 24 different Radio
Frequencies
ensuring your activation signal will
get
through when you need it.
-the competitors use simple, single frequency
RF sets that are prone to poor range and
RF interference which -prevents proper operation.
Our Remote Transmitter:
has two button activation to prevent
accidental
deployment, and a unique ESN or electronic
IDso there is no cross-over activation
by
other remote transmitters.
-the competitors use remote sets that are
coded by “dip switch” type selection making
it possible for -cross-over activation to
occur.
Our Transmitter has consistent 1000ft
Range:
Without the use of a roof mount antenna,
our super-sensitive RF receiver will
decode
valid signals @ 1000ft from inside
malls,
buildings, and other obstructions.
-the competitors systems require a roof mount
antenna to achieve minimal range 50-300ft
line of sight.
Our On/Off LED turns off when driving
so
as not to cause an additional driver
distraction.
-the competitors that have LED indication
available illuminate whenever their system
is on.
Our system has an automatic resetting,
bi-directional
door solenoid:
many vehicles are made with a set spring
that returns the factory door latch
to the
standby position. The springs operation
can
be hampered if additional stress is
applied
by an added component. If the latch
does
not fully return, the door lock will
jam
shut when engaged. Our system is designed
to pull the door latch to open, then
it will
push the door latch back to the standby
position.
-the competitors use single direction,
cable
pull type solenoids that add tension
to the
vehicle latch mechanism and can cause
the
locks to jam.
Our system includes park safety circuit:
The K9 CALLER includes the components needed
to prevent the door from miss-firing while
driving.
-the competitors often require you
to purchase
a “park siren kill” module for the
same results.
Our system incorporates a modular,
plug in
design simplifies installation, transfer,
and service.
We supply manuals, tech tips, and support
on line to help you during and after
installation.
We offer support from personnel that
know
the products and understand your requirements.

K9 CALLER™ Remote Door Popper Kit
The K9 CALLER™ Kit comes with the following:
Main Control Unit (MCU)
900mHz Spread Spectrum Receiver
(RCV)
900 mHz Spread Spectrum Transmitter
w/Belt
Clip (RTS)
Door Release Solenoid (DRS)
Gas Charged Spring (GCS)
2x Door Mount Bracket(s) (DMB)
w/Mounting
Hardware
In-Park Magnetic Safety Contact
Set (SFT)
Primary Wire Harness (HKS1)
Wire Harness for DRS (HKS2)
Master On/Off Switch w/LED Indicator
8x Wire Ties 12in.
Installer's Guide w/Operating
Instructions
|
|